This is the small block version of our tried and true Street Killer Krate. This 440 HP 500ft/lb small block is well mannered enough to drive across country yet can be obnoxious enough to get the attention of the local Sherriff you want to misbehave! We start with 360 block and do our usually race prep. Sonic check, align hone, parallel deck, bore and hone with deck plates to ensure a precision machined, durable short block. We then install one of our pump gas, Street 4” stroker rotating assemblies. This cast crank kit is cost effective and is practically bulletproof under 5500 RPM’s. The forged I beam is light weight and helps these engines rev faster than a 340! Since this is a “Street” engine we design the cam to be all done by 5500 RPM so it works great with 3.23 gears. The 4” stroke in more than a 440, these engine make AWESOME torque yet fit where are 318 might have been, can you say sleeper? We then finish filling the short block with Comp Cams timing chain, camshaft and lifters. A Melling oil pump keeps everything lubricated and a Mopar Performance distributor drive and timing chain tensioner keeps everything timed properly. A new oil pan and pick up complete the bottom end. All assembly information is recorded on a build sheet by one of our experienced engine assemblers. Anyone who assembles an engine here @ Muscle Motors has over 20 years of experience!!
The latest edition to our “Killer Krate” engine series is the Top Krate. The Top Krate is a competition only engine that is designed for Top Sportsman/Top Dragster and Quick 16/32 racing. Over the years, we have tried every conceivable engine combination and have come to the conclusion that our 596” package is the best “bang for the buck” for a competition engine.
Muscle Motors Proudly present’s its big block Killer Krate engine. The pump gas ground pounder is as equally at home on the street as on the track. 650 HP and 650 ft/lbs of torque makes this combination a killer in anyone’s book. All of that power achieved with a hydraulic cam, pump gas and 950 Quick Fuel carburetor. Add a custom solid ground camshaft (at additional cost) and power skyrockets to 700+ HP & 685 torque.
All on pump gas!
No exotic (read: expensive) parts or components were used in our combination. This is just a well thought out, well executed combination based on our years of winning races & national championships.
Muscle Motors proudly presents our Street Killer Krate engine series. This is another bulletproof, ground pounding stroker Krate engine for the more budget minded enthusiast. These stock appearing 383/400/440 based strokers are 500”, pump gas animals that uses stock style heads and a hydraulic cam with non adjustable valve train for low maintenance and cost. With 550 HP and over 600 Ft/lbs of torque, this stock appearing pump gas torque monster is at home in any Mopar!
The SB Killer Krate is an awesome pump gas monster guaranteed to surprise any unsuspecting big block. These combinations regularly make over 500HP and 525 ft lbs of torque with a hydraulic cam & pump gas. That’s big block power out of a small block.
We still follow our concept of not needing trick components, just well thought out will executed combinations with good parts and machining.
Page 1 of 2