Text Size

Stroker Kits

Small Block Stroker Kits

Street Kit 408”-416”

This is the kit we build our SB Street Krate engine with.  We start with a cast Eagle 4” stroker crank, 6.123 long forged I-beam connecting rods w/bronze wrist pin bushings, Keith Black Hypereutectic pistons, Michigan 77 rod and full groove main bearings, and  plasma moly piston rings,  The rotating assembly is then balanced to a tolerance of less than one gram. This kit is recommended for applications under 500 HP. 340 and 360 blocks only. Available in 4.030, 4.040, 4.060, 4.070

Only: $1199

Forged pistons available for 318, 340 and 360. Bores sizes available up to 4.080

Additional: $175


Performance Kit 390”- 416”

Hot Street or Bracket Rotating assembly (500 HP-800 HP)  4340 steel 4” stroker crankshaft, 6.123 4340 H beam rod w/7/16 ARP bolts and .984 wrist pins, forged Keith Black pistons, “H” series race bearings, file to fit plasma moly rings, Competition  internal balance. Available in pump or race gas compression for 318, 340 or 360 blocks in bores ranging from 4.030 to 4.080. 318: .030, .040 & .060

Only: $2099


Competition Kit 408”- 470”

We use this kit in higher RPM combinations (over 7000 RPM’s) or in nitrous and or ProCharged applications. This particular crank has a 2.100 rod journal for a great selection of bearings. The kit includes  4340 Callies Compstar 4” stroke crankshaft (340 main size ONLY!).  6.300 long 4340 H beam connection rods, Custom Ross pistons (any configuration) chamfered bearings, file to fit plasma moly rings, competition balanced, ready to install.

Only: $2999

Upgrade kit to 4.250 stroke forged Compstar crankshaft (requires oil pump modification to clear additional stroke) this will easily build 470”engine.

Additional: $500*

*Mopar Performance block capable of 4.185 cylinder bore required  

 

440 Kits

All of our Muscle Motors kits feature our private label crankshafts. As stated in the opening statement about stroker kits: we strongly recommend micro polishing of any (except K1 and Compstar) Asian crank.  As an option any of our Big Block kits can be upgraded to a K1 crankshaft for an additional charge. The K1 cranks do not require micro polishing to remove taper.

440/446: 3.75 stroke x 6.768 rod

This is really not a stroker kit but a stock stroke replacement rotating assembly. Te r standard kit is offered with a stock crank & rods and cast hyperutectic pistons. Plasma-moly piston rings, Clevite 77 bearings and balancing are all included. Upgrades are available.

Only: $1399


440/500: 4.15 stroke x 6.76 rod

This is the kit that stared it all. Forged dished pistons are required for pump gas compression. It is available in .030, .040 & .055 bores with quite a few different compression ratios available. This kit will require minor bore notching so that the rod bolts do not interfere with the block. You will also need to clearance the boss that the oil pick up tube screws into. Kit comes competition balanced with Plasma moly rings and chamfered bearings. A tried and true combination for the ages.

Only: $1999


440/512: 4.25 stroke x 7.100 rod

This is the kit that comes standard in our Killer Krate engine. The kit will actually make 505” in a +.030 bore. Again forged dished pistons are standard The 4.250 stroke is made with a 2.200 rod journal. This smaller journal does not need bore notching and only minimal work to the oil pick up boss. The long rod makes for a very light weight piston. Plasma moly piston rings, chamfered performance rod and main bearings along with competition balancing of the rotating assembly is included. This is the same kit we used in our 2008 Carlisle engine giveaway featured in Mopar Muscle magazine. We do have many choices for bore and compression available.

Only: $1999


440/525: 4.375 stroke x 7.100 rod, 1.

Were gettttiiinnng biiiggger! This is a great combination for heavier vehicles that still want to maintain an internal oil pick up tube. Station wagons, trucks, B and C bodies with full interior are common recipients of this stroker combination. Lots of stroke (read: torque) to motivate a 3800+lbs Mopar. Chamfered bearings as well a file to fit plasma moly rings are included in the balanced rotating assembly. Forged .030, .040 and .055 available in dished and flat top pistons.

Only: $1999


440/540: 4.500 stroke x 7.100 rod.

For stock blocks this is the largest stroke we will build. It will require bore notching, oil pump boss clearancing AND an external line oil system. If you want the max out of you stock engine block and don’t mind the external line oil system, this is the kit for you. The 4.500 stroke works great for Pro Street cars that have big tires a tall gears. This kit, like all of our kits is balanced and comes with file to fit rings and proper chamfered bearings. Flat top and dished forged pistons in .030, .040 and .055 are available.

Only: $1999


King Krate/ 4.500 & 4.750 stroke x 7.100 rod

These kits are for aftermarket (4.500 and bigger bore) blocks only. The 4.500 x 4.500 make a 572”. The 4.75 stroke x 4.500 bore makes a 604” (622” in 4.560 bore) These kits are what we use to make our King Krate pump gas engines. Ross dished forged pistons are standard equipment along with plasma moly rings and chamfered bearings. As with all of our kits, They are all meticulously balanced on our computerized Hines crankshaft balancer. There are many upgrades for the kits depending on application.

Only: $2199

 

400 Kits

400/451”: 3.75 stroke x 6.76 rod, 4.375 bore 1.320 CH piston.

One of the original stroker kits for big block Mopars. These kits are noting more than a 440 built with a really light piston. 3.75 x 6.76 (440 stroke and rod) but because the block is 3/4”shorter, the piston is ¾” shorter and literally ½ the weight. We use a new 4340 crank an rods with your choice of forged pistons. Rings, bearings and balancing included.

Only: $1999


400/470”: 3.91 stroke x 6.700 rod, 4.375 bore 1.320 CH piston.

This is one of those kits that works better than it should. When using stock port window cylinder heads (factory, Edelrock RPM, Stage VI) this is the PERFECT combination. Good amout of cubes, super lite weight rotating assembly, great rod ratio, just a dynamite combo.

Only: $1999


400/511”: 4.25 stroke x 6.535 rod, 4.375 bore 1.320 CH piston

My personal favorite combo for competition. These kits work really well with bigger port heads such as 440-1’s or B1’s. In a 400 block I don’t build anything bigger because there just isn’t any point in a stock block! This combo has a piston with a 1.320 compression height. What that all means is that it stops the piston at zero deck on an unmachined block. We charge an additional $100 to mill to tops of the pistons down (before balancing) to make sure you don’t end up with a positive deck piston or not enough piston to head clearance.

Only: $2099

 

383 Kits

450/383. This is a version of the tried and true 474/400 combo we pioneered back in the 80’s. Back then we would offset grind cranks to a 3.9 stroke with a 2.200 rod journal. We would then use a 6.535 long GM style rod and those kits worked AWESOME! Today we just have the cranks made new out of 4340 heat treated steel and use a similar, but slightly longer 6.700 long rod. This combination is ideal for someone looking for a little more out of their 383. The 383 kits come with forged Ross dished pistons, chamfered bearings (we have chamfered 383 & 400 main bearings), file to fit plasma moly rings and competition balancing for a truly ready to go kit when you receive it.

Only: $2199


496/383. This combination actually makes 489” in a +.030 bore and “496” in a +.060 bore. We just call it 496” because our original welded stroker kits that were the first on the market back in the 80’s were called “496 Stroker Kits”. This combination is a TORQUE MONSTER. 4.25 stroke, 6.535 and a 1.307 compression height dished piston (for pump gas compression) and is ideal for someone building the ultimate sleeper. Our 1.307 piston also stops well below an unmachined stock block deck surface. These Ross pistons along with chamfered rod and main bearings and competiton balancing

Only: $2199